spray tower
英 [spreɪ ˈtaʊə(r)]
美 [spreɪ ˈtaʊər]
网络 喷淋塔; 喷雾式; 喷雾塔; 喷雾干燥塔; 喷粉塔
双语例句
- Numerical Simulation of Influence of Inlet Location on Flow Field in Spray Tower
入口位置对喷淋塔流场影响的数值模拟 - The solid spray tower plate is suitable for various mass transfer plate towers, particularly plate towers with higher gas phase load.
适用于各类传质板式塔，尤其适用于气相负荷较大板式塔。 - The wall sticking of half wet material is concerned to the structure, fixing and operation of spray drying tower and sprayer, the motion of hot air in tower.
半湿物料粘壁主要与喷雾干燥塔结构、雾化器结构、安装、操作以及热风在塔内的运动状态有关。 - The atomization characteristics of wet flue gas desulfurization spray tower under single layer spraying Application of Secondary Jet-grouted method on Jet-grouted Pile Construction in Sand Soil Stratum
湿法脱硫喷淋塔单层喷淋雾化性能试验二次旋喷在砂土地层旋喷桩施工中的应用 - Comparison between Spray Tower and Jet Bubbling Reactor Flue Gas Desulfurization Techniques
规定脱碳率的脱碳层厚度喷淋塔、鼓泡塔烟气脱硫技术的比较 - Study on the Model of Monomer Recovery Distillation Column Based on the Mechanism Analytic Method; The atomization characteristics of wet flue gas desulfurization spray tower under single layer spraying
基于机理分析法的脱单塔装置建模研究湿法脱硫喷淋塔单层喷淋雾化性能试验 - The utility model relates to a spray cooling tower for resolving the problem of current spray cooling tower as poor heat insulation effect.
本实用新型涉及一种喷雾式冷却塔，解决的是现有的喷雾式冷却塔，围板隔热效果差的问题。 - The utility model relates to the technical field of waste gas treatment equipment, in particular to a defogging device on a waste gas spray tower.
本实用新型涉及废气处理设备技术领域，特指废气喷淋塔上的除雾装置。 - Numerical Simulation of Liquid-column Spray Tower with Different Gas Inlets
进气方式对液柱喷射试验塔内部流场的数值模拟 - Comparative Analysis of Bubbling Tower and Spray Tower Operating for Large-capacity Thermal Power Generating Units
鼓泡塔与喷淋塔在大型火力发电机组上运行的对比分析 - Numerical simulation of wet flue gas desulfurization spray tower
湿式烟气脱硫喷淋塔内部流场数值模拟研究 - Design and analysis of the spray tower proper for flue gas desulphurization
烟气脱硫喷淋塔本体设计与分析 - Particle Trajectory Model Used in Numerical Simulation of Flue Gas Desulfurization Spray Tower
颗粒轨道模型用于烟气脱硫喷淋塔两相流数值模拟 - Study on Numerical Simulation of flue gas flow field in spray tower of wet flue gas desulfuration system
湿法烟气脱硫（WFGD）喷淋塔内烟气流场的数值模拟研究 - Production reason of wall sticking in production of PVC resin in spray drying tower was introduction. The improving method was put forward from several aspects. For example, the fixing of jet of spray drying tower, operation quantity of air and temperature.
介绍了喷雾干燥塔在PVC树脂生产中产生黏壁的原因，并从喷雾干燥塔喷嘴的安装，操作风量以及温度等方面提出了改进方法，取得了良好的效果。 - Operational performance of the flue gas desulfuration system with spray bubbling tower on 600 MW Unit
喷射鼓泡塔烟气脱硫在600MW机组上的运行特性 - The Analysis of Process of Making Powder Wils and Research of Planning Spray Cooling Tower
粉末油脂生产过程分析与喷雾冷却塔设计探讨 - Results of numerical simulation show that the general tendency of flue gas flow field in the spray tower to be roughly identical, the geometric structure dimensions and operation parameters have greater effect on the flue gas flow field in the spray tower.
数值模拟结果表明，喷淋塔内烟气流场总体趋势大体上一致，几何结构尺寸和运行参数对塔内烟气流场有较大影响。 - Design of a new spray humid tower applied in cement industry
水泥行业用喷雾增湿塔的改型设计 - The fundamental principle, structure and selection for attachment of a new spray humid tower are introduced.
介绍了喷雾法增湿的基本原理、设备的结构设计及附件的选型，讨论了对实际生产中可能发生的操作故障的防止与消除措施。 - A two-dimension computational fluid dynamics ( CFD) study of the two-phase flow in a wet flue gas desulfurization ( FGD) spray tower is presented.
以300MW机组湿法烟气脱硫喷淋塔为研究对象，利用计算流体力学通用软件对其内部两相流场进行模拟。 - Analysis on reasons of wall sticking of spray drying tower
喷雾干燥塔黏壁原因的分析及探讨 - The influence of spray dry tower ′ s structure on the yield of product
喷雾干燥塔结构对产品收率的影响 - Mathematical simulation for design of spray humid tower
喷雾增湿设备的数学模拟设计 - Frequency converter Application in control system of mist spray drier tower
变频器在喷雾干燥塔控制系统中的应用 - In this paper, the possibility of extracting hydrogen peroxide from ethyl-anthraquinone operating fluid in spray tower is studied.
探讨了用喷雾塔从乙基蒽醌工作液中萃取过氧化氢是可能的。 - Application of Dynamic Matrix Control in Spray Drying Tower
动态矩阵控制在喷雾干燥塔中的应用研究 - According to the experimental results, we drew some conclusions as followings. 1. The results of spraying cold test showed that the spiral nozzles used in the test were suitable for spray tower in fast pyrolysis and met the need of spray medium.
得到了以下结论：1.喷淋冷态试验结果表明，试验所用螺旋喷嘴适用于快速热裂解中喷淋塔内的雾化喷淋，满足其喷淋介质的雾化要求。